TEGO CAM Installation



1. Install Camera using provided bracket with two small screws OR using provided 3M double stick tape.

2. Run the camera’s power cable to main battery.

Or to the jump terminal.


Or to the Fuse Box using provided fuse tap.

3. Run antenna wire to just under the windshield area. Peel off tape and attach. (Helpful tip – attach antenna right below windshield wiper. Make sure it is not obstructing the windshield wiper’s movement).

4. Using provided QR code on the first page of manual, download free app from app-store.

5. Connect your phone to the Camera’s Wi-Fi network. Open app on your phone. Permit for the camera to connect and have access to your phone’s camera.

Enjoy your TEGO CAM! Happy Motoring!

 View Instructions in PDF